FRANK Solutions for Class 9 Chemistry Chapter 3 - Elements, Compounds and Mixtures

Understand your syllabus concepts better with Frank Solutions for ICSE Class 9 Chemistry Chapter 3 Elements, Compounds and Mixtures. Easily understand concepts such as pure substances, impure substances, metals, non-metals and more. Also, get correct answers for MCQs and other questions from your textbook at TopperLearning.

Revise the major differences between mixtures and compounds with Frank textbook solutions. Access ICSE Class 9 Chemistry study materials to revise all the key topics in Chapter 3. You can also watch video lessons or practise sample question papers to score more marks in your final exam.

Readmore

Chapter - Exercise

Chapter 3 - Elements, Compounds and Mixtures Exercise 41

Question 2

Name:
(a) The most abundant element present in the Earth's crust.
(b) The three most common elements present in the human body.
(c) Two elements that exist in the liquid state.
(d) One gaseous element which is
(i) Monoatomic
(ii) Diatomic
(e) Two metallic elements that can  exist as liquids at about 30oC.
(f) Name two noble gases?

Solution 2

(a) Oxygen
(b) Carbon, hydrogen, Oxygen
(c) Mercury, Bromine
(d) (i) Helium
(ii) Oxygen
(e) Gallium,caesium
(f) Two noble gases are-
(a) Helium
(b) Argon

Chapter 3 - Elements, Compounds and Mixtures Exercise 42

Question 3

Air is a mixture. Give points in support of this statement.

Solution 3

Air is a mixture because-
(i) The composition of air is not fixed i.e. the components may be present in any proportion by mass.
(ii) Components of air i.e. nitrogen, oxygen etc. do not react with each other.

Question 4

Classify the following into elements, mixtures and compounds: lead, gunpowder, air, petrol, ink, common salt, alcohol, sand, sodium and mercury.

Solution 4

Elements - Lead, Mercury, Sodium
Mixtures - Air, petrol, ink, gunpowder
Compounds - Common salt, alcohol, sand

Question 5

What are pure and impure substances? Give two examples of each.

Solution 5

Pure substance-
A pure substance is one which is made up of only one kind of particles. These particles may be atoms or molecules.
Example-Sulphur,  water.
Impure substance-
They are mixtures of two or more chemically different substances mixed in indefinite proportions. The constituent substances retain their properties in the mixture.
Example-Mixture of salt and sand, gunpowder

Question 6

Name a metal and a non-metal which are liquids at room temperature.

Solution 6

Mercury is the metal which is liquid at room temperature and bromine is the non-metal which is liquid at room temperature.

Question 7

What are the main differences between compounds and mixtures?

Solution 7

Question 8

Draw a flow chart for the schematic representation of different types of matter.

Solution 8

Question 9

State two reasons for believing that copper is a metal and sulphur is a non-metal.

Solution 9

Two reasons for believing that copper is a metal and sulphur is a non-metal are:-
(i) Copper is malleable and ductile while sulphur is neither malleable nor ductile.
(ii) Copper is a good conductor of heat while sulphur is not good conductor of heat.

Question 10

What are the metalloids? Write two examples of metalloids.

Solution 10

Metalloids - The elements which possess properties intermediate between those of the metals and non-metals are called as metalloids. They react with both acids and alkali's to form salts.
Ex - Arsenic, antimony

Question 11

Name a non-metal which is a good conductor of electricity.

Solution 11

Graphite is a non-metal which is a good conductor of electricity.

Question 12

Compare the properties of metals and non-metals with respect to
(a) Malleability
(b) ductility
(c) conductivity

Solution 12

Question 13

What is the general name of the materials which contain atleast two pure substances and show the properties of their constituents?

Solution 13

Mixture is the general name of the materials which contain atleast two pure substances and show the properties of their constituents.

Question 14

Name the following:
(a) A metal stored in kerosene oil.
(b) A liquid non-metal.
(c) A metalloid
(d) A radioactive noble gas.
(e) A liquid metal
(f) A solvent for rust
(g) A gas which is highly soluble in water.

Solution 14

(a) Sodium
(b) Bromine
(c) Arsenic
(d) Radon
(e) Mercury
(f) Oxalic acid
(g) Carbon dioxide

Question 15

State the differences between an element and a compound.

Solution 15

Question 16

Fill in the blanks:
(a) Elements cannot be broken into ______ by chemical or physical methods.
(b) An element is a pure substance in which the ______ number of each atom is same.
(c) Carbon is an element because the atomic number of each carbon atom is ______.
(d) An example of a homogeneous mixture of a liquid and a solid is ______.
(e) The atomicity of Oxygen is ______.

Solution 16

(a) simpler substances
(b) atomic
(c) same
(d) mixture of salt and water
(e) two

Question 17

Brass is a mixture of two elements namely copper and zinc. Write the names of two other mixtures which contain elements only.

Solution 17

Names of two other mixtures which contain elements only are-
(a) Bronze
(b) Duralumin

Question 18

Define
(a) A molecule
(b) Atomicity

Solution 18

(a) A Molecule - The smallest particle of a substance that retains the chemical and physical properties of the substance and is composed of two or more atoms.
(b) Atomicity - Atomicity of an element is defined as the number of atoms present in one molecule of that element.

Question 19

Why cannot a mixture be represented by a chemical formula?

Solution 19

Since, the constituents of a mixtures may be present in varying proportions so it cannot be expressed by a fixed chemical formula.

Question 20

Name a mixture is used.
(a) By all living things.
(b) In the construction of buildings.
(c) As a food.

Solution 20

(a) Air
(b) Cement
(c) Milk Sugar solution

Question 21

What would you observe if a mixture of powdered iron and sulphur is heated in a test tube?

Solution 21

If a mixture of powdered iron and sulphur is heated in a test tube, a black shiny compound iron(II) sulphide (FeS)  is formed.

Question 22

Name two elements which show exceptions to the properties of
(a) Metals
(b) Non-metals

Solution 22

(a) Tungsten, Mercury
(b) Graphite, Iodine

Chapter 3 - Elements, Compounds and Mixtures Exercise 43

Question 23

How many types of mixtures are known? Give examples also.

Solution 23

Question 24

Define the following terms and answer the association questions.
(a) Chromatography: State three advantages of chromatography.
(b) Filtration: Give example of a mixture in which the components can be  separated by this technique.
(c) Fractional distillation : Can a mixture of chloroform and water be separated by this method.
(d) Centrifugation: State one application of this method.

Solution 24

(a) Chromatography - The chromatography is a technique of separating pure substances from the mixture.
Advantages of chromatography -
(i) It requires a very small amount of the substance or sample.
(ii) The components retain their individuality during the process.
(iii) Chromatography finds application in easy separation of substances with similar physical and chemical properties.
(b) Filtration-It is a separation technique for separating a mixture in which one component should be solid and insoluble in the other liquid component.
Example- Barium sulphate  in water.
(c) Fractional distillation -
It is a technique used to separate  two liquids which dissolve in one another.The separation relies on the differences in boiling points of the two liquids.
No, mixture of chloroform and water cannot be separated by this method.
(d) Centrifugation:It is a method for separating the suspended particles of a substance from a liquid in which the mixture is rotated at a high speed in centrifuge machine.
Application - The clay particles in water (which are very fine) can be separated by centrifugation.

Question 25

Explain the following terms:
(a) Sublimate
(b) Distillate
(c) Filtrate
(d) Supernatant liquid
(e) Sediment

Solution 25

(a) The vapour state which is obtained by heating solid without passing through liquid state is called sublimate.
(b) A liquid condensed from vapour in distillation is called distillate.
(c) The liquid produced after filtering a suspension of a solid in a liquid is called filtrate.
(d) Supernatant liquid is the upper layer of fluid found after a mixture has been centrifuged.
(e) If there is a heterogeneous mixture containing an insoluble solid in a liquid, then the solid substance that settle down is called sediment.

Question 26

What process would you use to separate alcohol (B.P.=78oC) from a mixture of alcohol and water(B.P.=100oC)?

Solution 26

We use fractional distillation to separate alcohol from a mixture of alcohol and water since the difference in boiling point between alcohol and mixture is very less.

Question 27

Describe briefly how will you
(a) Obtain pure water from sea water?
(b) Obtain a sample of pure iodine and sodium chloride.

Solution 27

(a) We obtain pure water from sea water by distillation.
(b) A sample of pure iodine and sodium chloride is obtained by sublimation.

Question 28

On what factors does the separation of the mixture depends?

Solution 28

The separation of the mixture depends upon-
(i) Size of the constituents
(ii) Magnetic properties of constituents
(iii) Mass of the constituents
(iv) Solubility of the constituents
(v) Miscibilities of the constituents
(vi) Boiling point of the constituents
(vii) Diffusion rate of the constituents

Question 29

What is solvent extraction? Give an example of a separation of mixture by this method?

Solution 29

This is a separation technique of solid-solid mixture. This method involves the use of a solvent in which only one of the solid present in the mixture dissolves. Undissolved solid is removed by filtration. Mixture of ammonium chloride and silver chloride is separated by this method.

Question 30

(a) Name a technique to separate a mixture of two liquids?
(b) Can a mixture of chloroform (B.P.= 61oC) and carbon tetrachloride (B.P.=77OC) be satisfactorily separated by the process you use for separating the various fractions of petroleum? What modifications will you make in the apparatus for this purpose?

Solution 30

(a) By distillation and fractional distillation we separate the mixture of two liquids.
(b) Yes, mixture of chloroform (B.P.= 61oC) and carbon tetrachloride (B.P.=77OC) be satisfactorily separated by the process of fractional distillation which is used for separating the various fractions of petroleum.
For this purpose we will make two fractionating columns in the apparatus.

Question 31

Name three different methods in each case for separation of
(a) Solid-solid mixtures
(b) Solid liquid mixtures
(c) Liquid-liquid mixtures
Give one example in each case.

Solution 31

(a) Solid-solid mixtures
(i) Magnetic separation method-Separation of iron ore from impurities
(ii) Gravity separation-Mixture of saw dust and sand
(iii) Solvent extraction-Mixture of sulphur and sand
(b) Solid- liquid mixtures
(i) Evaporation-Water and sodium chloride
(ii) Distillation-Iodine in chloroform
(iii) Filtration-Barium sulphate in water
(c) Liquid-liquid mixtures
(i) By separating funnel-Oil and water mixture
(ii) Distillation-Acetone and water
(iii) Fractional distillation-Ethyl alcohol and water

Question 32

What do you understand by chromatography? On what principal is it based?

Solution 32

The chromatography is the technique of separating pure substances from the mixtures. The chromatographic techniques was first employed by a Russian scientist Michael Tswett in 1903 for the separation of coloured substance from the mixture.
Principle of chromatography: The principle of chromatography is based on the difference in the extent of interaction (absorption) of various substances with a stationary phase and a mobile phase. A substance which interacts strongly with the mobile phase goes ahead of the other substance which interacts strongly with the stationary phase.

Question 33

How is chromatography applied in the separation of coloured constituents present in a mixture of ink?

Solution 33

Ink generally contain more than one dye. This mixture of ink is used as moving phase. Different constituents of ink move at different speed. The solvent rises up the filter paper over the spot and carries the different coloured components of ink to different heights on the filter paper. Each spot thus obtained at a particular height on the filter paper contains a particular constituent of the ink. Thus, the components of the ink are separated.

Question 34

Name the process used to separate the components of liquid air.

Solution 34

By the help of fractional distillation we separate the components of liquid air.

Question 35

In which of the following four substances (sodium chloride, sodium carbonate crystals, sulphuric acid and iron) will there be
(a) increase in weight,
(b) decrease in weight,
(c) no change in weight
When exposed to air ?

Solution 35

(a) Increase in weight - Sulphuric acid and iron
(b) Decrease in weight - Sodium carbonate crystals
(c) No change in weight - Sodium chloride

Question 36

How will you separate a mixture of chalk powder and water?

Solution 36

By filtration, we will separate a mixture of chalk powder and water.

Question 37

Draw a neat and labelled diagram of the apparatus you would use to obtain pure water from a salt water mixture (or salt solution).

Solution 37

Question 38

What is the use of fractionating column in fractional distillation?

Solution 38

Fractionating column avoid the collection of distillate and re-distillation of distillate several times during fractional distillation.

Question 39

Name two pair of liquids which can be separated by using a separating funnel.

Solution 39

Two pair of liquids which can be separated by using a separating funnel-
(i) Oil and water
(ii) Chloroform and water

Question 40

How will you separate camphor, common salt and iron nails from their mixture?

Solution 40

At first, with the help of magnet, iron nails will separate. Then, by sublimation camphor will separate from common salt.

Question 41

Distinguish between the following terms with examples:
(a) decantation and filtration,
(b) filtrate and distillate
(c) fractional distillation and fractional crystallization,
(d) metal and metalloid.

Solution 41

Chapter 3 - Elements, Compounds and Mixtures Exercise 44

Question 42

You are given two substances X and Y. X is a mixture of iron powder and sulphur. Y is powdered iron sulphide. What changes, if any, will be observed in 'X' and 'Y' in each of the following cases:
(a) A magnet is moved over 'X' and 'Y' separately.
(b) 'X' and 'Y' are treated with carbon disulphide separately.
(c) 'X' and'Y' are treated with dilute HCl separately. State the reason for the difference in the behavior of 'X' and 'Y'.

Solution 42

(a) When a magnet is moved over 'X', iron fillings are pulled away and stick to the magnet. When a magnet is moved over 'Y', it remained  unaffected.
(b) When'X' is treated with carbon disulphide, sulphur dissolves but not iron. While, when'Y' is treated with carbon disulphide, iron sulphide does not dissolve  but sinks to the bottom of the test tube.
(c) When 'X' is treated with dilute HCl, a colourless, odourless gas hydrogen is evolved which burns with a blue flame and is extinguished with a pop sound. While, when 'Y' is treated with dilute HCl, a colourless gas with the smell of rotten eggs is evolved which is H2S.
There is difference in the behavior of 'X' and 'Y' because 'X' is a mixture while 'Y' is a compound. The component of a mixture do not react chemically, so retain their identity in the mixture while the components of compound react chemically, so do not retain their identity in the compound.

Question 43

Name the process which is used in milk dairies to separate cream from milk.

Solution 43

Centrifugation is used in milk dairies to separate cream from milk dairies.